Prerequisite: None
 
This comprehensive workshop introduces students to the fundamentals of metalsmithing while creating a single-cabochon pendant with a bail and hanger. Students may also expect to complete a  pair of earrings with either soldered posts or earwires, and the option to add half-drilled pearls or stones. 
 
Basic hand tools (saw frame, hand files, hammers, etc.)  are provided for you to use during the course of the workshop.
 
Upon successful completion of Metals 1, you will be awarded a Certificate of Completion for 30 contact hours & 4 hours of free Open Studio Time.
 
TECHNIQUES COVERED INCLUDE: 
Studio habits, safety and simple ergonomics
When and how to use a bench shear
Sawing and piercing techniques
Hammer texturing and stamping
Adding texture with a Rolling Mill
Filing and sanding
Basics of soldering using four temperatures of solder
How to make a bezel for a traditional cabochon
Firescale removal methods
Flex shaft techniques for finishing and polishing
Introduction to large machine prep/finishing 
 
MATERIAL & SUPPLY LIST
You are responsible for purchasing and bringing your supplies with you on the first day of class. You may choose to purchase the Materials Kit from us for an additional $114 (tax included)—just choose "Yes" on the Materials Kit option. Items in bold below are included in the kit. Please note: the kit does not include  a cabochon and bezel wire.
 
12" plain Fine Silver Bezel (strip) 26 gauge, dead soft, with at least 1 mm above girdle of your chosen stone (both will be checked in class)
Cabochon: 18mm diameter (dime-sized) or larger (up to 30x40mm oval) must have a flat bottom, no facets, and rounded corners if it has any.
1.5x2” Sterling Silver Sheet: 20 gauge, dead soft
8" Sterling Silver Round Wire: 14 gauge, dead soft
6" Sterling Silver Round Wire: 12 gauge, dead soft
6" of each of the following wire solders:  22 gauge Silver Solder Wire in Extra
Easy, Easy, Medium, Hard (please label each wire and keep separated)
6x6" Copper sheet: 20 gauge (typically sold in 6x12 sheets)
Wet/Dry Sandpaper: 1 sheet each of the following grits - 220 or 240, 320, 400, and
600 grit (usually dark gray, full sheets 9x11”)
4 sanding stick blanks (available in our office for purchase)
Saw blades: One dozen of the 2/0 jeweler’s saw blades
Dedeco Try ‘em Silicon Polishing Wheel Assortment plus 1/6" screw mandrels
2 Medium Solid Felt Wheels (1”) plus mandrels 
N95/KN95 Face Mask
4 very small plastic containers with lids for solder chips
1–2 small containers for your scrap silver and leftover copper pieces
 
OPTIONAL ITEMS:
Apron
Disposable nitrile/latex gloves
1 old tea-towel or t-shirt scrap for polishing (no terrycloth) 
Notebook/pen/pencils for taking notes
Fine point Sharpie marker
Optivisor or reading glasses (12–18” focal length)
Didymium Plus ACE glasses (for soldering) D&L Art Glass has these locally
 
 
CABOCHON & BEZEL WIRE
You may either bring a cabochon with you, or you have the option to purchase a cabochon and bezel wire from us at an additional cost—they range anywhere from $8–$40 and bezel wire is $10–$14.
Your cabochon selections can be made and paid for on the first day of class.
 
Cabochons should have a flat bottom, no facets and rounded corners and be sized no smaller than a dime (18mm) in diameter and no larger than a 40x30mm oval.  
 
Please contact us with any questions you may have, we'll be happy to answer them. 
 
30 Contact Hours  |  Studio Fee included in tuition ($25 value)